Xiertek XTK30AP.29.8dBm,802.11G,PoE Buildin Booster SLV

$99.99

Always Free Shipping
Xiertek XTK30AP.29.8dBm,802.11G,PoE Buildin Booster SLV

Xiertek XTK30AP 29.8dbm output 2.4GHz Superior Power AP+ IEEE 802.11g compliant Built in PoE 18V DC 1A. WDS AP 960mW./Client/Bridge/ High Power Wireless Booster. (Silver Sheet-Metal w. Metalic Coating)

This product is eligible for FREE USPS 2-3 Days Priority shipping

Not getting enough distance and coverage with your WLAN equipment? Xiertek introduces the simplest and most powerful solution to get the desirable distance you need. Xiertek 's ALL NEW XTK30AP High Power Radio Repeater/Wireless Super Power Booster.One of the most powerful booster radio repeater for wirless local area network, upto to maximum 960 mW AP/Client/Bridge/Repeater clean radio adjustable to Maximum 29.8dBm/960m with operating Range Indoor: 1200 ft to 4500ft max,Outdoor: 4500ft to 10000+ft max.open area.

Advanced RF Circuitry design. Delivery a gain with high signal to noise ratio. Suitable for point to point and point to multi point range upto 4500+ feet for indoor range coverage.
Made of high quality RF shielding metal casing w. Metallic coating.

Color Available in:Tunstang Silver Metallic
Storefront Condition: Brand New. Retail Color PKG. Status: In Stock and Ready To Ship. Warranty: 2 years (Parts & Labors) Full Warranty UPC #: 094922791917

XTK-30 Multi-AP Specifications
Modes: Access Point / AP Client / Repeater / WDS Bridge

Standards:OFDM & DSSS

Frequency Range: 2.4 - 2.497 GHz ISM band

Transmit Power: Min 27dBm-Max 29 dBm +/- 1 dBm

Receiver Sensitivity
< -72 dBm @ 54 Mbps
< -86 dBm @ 11 Mbps

RF Antenna:ISM Band, Omni-Directional detachable RP-SMA, 2dBi gain

Interface
1 - 10Base-T/100Base-TX Ethernet port
1 - power port

Security: WPA / WPA2 / WEP 64 & 128 bit

Device Management: Web-based manager

Operating Range: 4500+ feet in door range

** The practical operating range depends on the environment

Power Supply: Input: 100~240V AC 50~60Hz Output: 18V DC 1A
POE ( Power Over Ethernet ) runs up to 330 Ft.
Environment
0~55°C (32~131°F) - Operating
-20~80°C (-4~176°F) - Storage

Humidity (non-condensing) 5%~95% typical

As an Access Point, the XTK30AP utilizes Level 2 Peer-to-Peer Blocking to provide unmatched security for client devices on your wireless network. Its 500mW of RF transmit power and power-over Ethernet (POE) function, save wireless network owners money by eliminating the need for additional external amplifiers and power termination.

These features also make the XTK30AP, the best choice for use as a Client Bridge. When paired with a directional antenna, its superior signal quality and range maximize transmission speeds even at the farthest reach of the RF signal. The compact size and multiple mounting options of the XTK30AP allow for installation virtually anywhere.

The XTK30AP is the choice in high powered radio equipment for wireless network deployment

XTK 30 Multi-AP Specification:

Modes
High Power Access Point / Client / WDS Bridge / Repeater

Standards
IEEE 802.11 IEEE 802.11g WLAN Compliant

Direct Sequence Spread Spectrum (DSSS) Wireless Frequency Range 2.4 ~ 2.497 GHz ISM Band

Data Range & Modulation
11Mbps (CCK)
2Mbps (DQPSK)
5.5Mbps (CCK)
1Mbps (DBPSK)

RF Transmit Power (Adjustable)
+17dBm (50mW)
+20dBm (100mW)
+24dBm (250mW)
+27dBm (500mW)
+29.8dBm (960mW)

Receiver Sensitivity
< -72 dBm @ 54Mbps
< -85 dBm @ 11Mbps
< -93 dBm @ 1Mbps

Receive Gain
16dB Max RF Antenna ISM Band, Omni-Directional detachable RP-SMA, 2dBi gain

Interface
1 - 10Base-T/100Base-TX Ethernet port
1 - power port
Protocols Supported TCP/IP DHCP client Wireless Bridging WPA 802.11f / IAPP HTTP SNMP

Security
Level 2 Peer to Peer Blocking WPA/WPA 2/64 &128-bit WEP (RC4) IEEE 802.1x port-based authentication MAC address-based access control Device Management Web-based manager SNMP MIB 1 & MIB 2

Operating Range
Indoor: 1200 to 4500+ft (Max)
Outdoor:4500 to 10000+ ft (Max) in open area only
Lightning Protect Surge Current 20KA
Power Supply (POE or Direct) Power Over Ethernet
Standard: (POE runs up to 330 Ft.)
Input: 100~240V AC 50~60Hz
Output: 18V DC 1A
Modulation Techniques 11g: DSSS (CCK, DQPSK, DBPSK)
Physical Dimensions
(L) 5.12 in. (W) 3.7 in. (H) 1.02 in.

Environment
0~55°C (32~131°F) - Operating
-20~80°C (-4~176°F) - Storage
Humidity (non-condensing) 5%~95% typical
Warranty: 2 Years Limited

Package Contents
XTK 30 Multi AP 500mW,
Removable 2 dBi RP-SMA Antenna
DC 18v 1A Power Adapter
POE Injector
18VDC Power Adapter for extended PoE runs (Standard)
3 fts Crossover Ethernet Cable
Quick Install Manual and CD. Retail

Package Contents
1-XTK 30 Multi AP./ *2 dBi RP-SMA Antenna. /*1-DC18V 1A Power Adapter/*1- 3 fts Crossover ethernet Cable./*1-Power Over Etnernet Injector. *1-Quick Install Manual and CD Driver. Retail PKG. One Year Limited Warranty

Add to Cart:

  • Model: Xiertek XTK30AP.29.8dBm,Silver
  • Shipping Weight: 3.01lbs
  • 6 Units in Stock


This product was added to our catalog on Friday 18 March, 2011.

Your IP Address is: 54.226.5.29
Copyright © 2013 Xiertek USA. Powered by Zen CartZen Cart templates