Apollo CompactFlash- Palmed Sized 56K Modem PC Card for PDA

$9.99  $6.99
Save: 30% off

FEATURES

  • CF+ & CF Specifications Rev 1.4

  • High performance 16C550A compatible UART that guards against data loss between modem and Windows-based applications

  • Small form factor integrates into mobile and handheld platforms

  • Attached port with one integrated RJ11 phone connector into the card. No moving parts to break and no media coupler to lose

  • Internal DAA with standard RJ-11 plug cable for direct connection to the telephone wall outlet

  • Digital line protection design guards the modem against connecting to high-current digital PABX

  • Low power consumption with 3.3V operation and automatic sleep mode to extend PC battery life

  • Hayes compatible AT commands allows you to run varies data/fax software packages

  • Advanced Microsoft Plug-and-Play technology to run with Windows CE

  • Flash memory inside for easy feature upgrade

  • Auto-step downward compatibility for connection

  •  

SPECIFICATIONS

System Requirements

  • [1] Type-I CompactFlash slot supporting IO functionality

  • Windows CE 2.0 or newer version

  • Operates in 3.3v power supply

  • CF+ and CompactFlash Spec. Reversion 1.4 compliant Card Services and Socket Services

Operating Environments

  • Windows CE 2.0 or newer version

Card Type

  • CF+ / CompactFlash Rev. 1.4

Software Control Interface

  • Hayes compatible AT command set

Modem Operating Protocol

  • V.90 (up to 56,000bps, download)

  • K56Flex (up to 56,000bps, download)

  • V.34+ (up to 33,600bps)

  • V.34 (28,800 ~ 2,400bps)

  • V.32bis (14,400/12,000/9,600/7,200bps)

  • V.32 (9,600/4,800bps)

  • V.23 (1,200 TX / 75 RX bps)

  • V.22bis (2,400bps)

  • V.22/Bell 212A (1,200bps)

  • V.21/Bell 103 (300bps)

  • Fax Standards: Group III, V.29, V.27ter, V.21 Channel 2, V.17, EIA Class 1 Commends

Error Control

  • V.42, MNP Class 2-

Data Compression

  • V.42bis, MNP 5

Diagnostic

  • Power-up self-test

  • Local analog loopback test

  • Local digital loopback test

  • Remote digital loopback test

Operation Modes

  • Asynchronous Full Duplex

  • Automatic / Manual Answer

Power Consumption

  • Operating Mode: 186mA (max.)

  • Sleep Mode: 18.5mA

Dimensions

  • 88 x 42 x 15 mm (3.46 x 1.65 x 0.59 inch)

Line Interface

  • RJ-11, 2-wire dial-up

Flow Control

  • Hardware CTS/RTS

  • Software XOn/XOFF

Dialing Capability

  • DTMF tone and rotary pulse

Receive Sensitivity

  • -40 (+/-) dBm

Transmit Level

  • Permissive -10 (+/-) dBm

Certification

  • FCC Class B, CE


Add to Cart:

  • Model: CFM560
  • Shipping Weight: 1.08lbs
  • 37 Units in Stock


This product was added to our catalog on .

Your IP Address is: 23.22.212.158
Copyright © 2013 Xiertek USA. Powered by Zen CartZen Cart templates